Listing Virtual Networks on Node

The Virtual Networks subtab (accessed thru clicking the Network tab on the Hardware Node dashboard) displays a list of Virtuozzo Virtual Networks available in Parallels Infrastructure Manager. The information on Virtual Networks is presented in the table having the following columns:

Column Name	Description
Virtual Network	The name assigned to the Virtuozzo Virtual Network.
Connection Status	Indicates whether the Virtual Network is connected to some network adapter ( connected ), set for usage on the Hardware Node only ( local ), or not configured.
Network Description	The description of the Virtual Network, if set.
Assigned Interface	If the Virtual Network is connected to some network adapter on the Hardware Node, displays the name of this adapter.

Note: To learn more about the notion of Virtuozzo Virtual Networks and their relation to physical adapters, VLAN adapters, and Containers, please refer to the Managing Virtual Networks section .

To facilitate your working with Virtual Networks, you can:

Filter them by the parameters listed in the table above. To this effect, click the Show Search link over the table, enter the needed data in the field(s) provided and click Search . The Virtual Networks matching the specified criteria will be displayed in the Connections table. To have the full list of Virtual Networks back, click Reset Results .
Configure the number of columns to be displayed in the Connections table. To this effect, click the Select Columns link and clear the check boxes near the column name(s) that you wish to hide.
Change the Virtual Networks order by clicking the corresponding column name in the Connections table.
Modify the number of network adapters simultaneously displayed in the Connections table by clicking the 10 , 20 , 40 , or 80 link at the top of the table.

The Virtual Networks subtab also allows you to:

Create a new Virtuozzo Virtual Network by following the New Virtual Network link at the top of the Connections table.
View detailed information on an existing Virtual Network by clicking its name in the Connections table.

Please send us your feedback on this help page