Shared Networking

By default, all virtual machines created using the Express Windows and Typical modes are set to work in the Shared Networking mode. In this mode your virtual machine can access other computers on your local network and the Internet by using the IP address of the physical computer. The virtual machine itself does not have its own IP address on the network. This mode allows you to specify port forwarding rules for the virtual machines running on the host computer, which can be especially useful when running HTTP, FTP, or other types of servers in virtual machines.

The Shared Networking mode does not require any additional configuration. With this mode enabled, your virtual machine will share whatever network connection your physical computer uses at the moment.

You may wish to use the Shared Network mode in the following cases:

• your computer accesses the Internet via a modem or another non-Ethernet device
• you need to access the Internet from inside your virtual machine but are concerned about security
• you have problems with working in the Bridged Ethernet mode

To configure your virtual machine to use Shared Networking:

1. Open the Virtual Machine Configuration dialog by choosing Virtual Machine > Configure .
2. Select Network Adapter in the Hardware list.
3. On the Network Adapter pane, make sure that the Enabled, Connected and Shared Networking options are selected.

   Note: In the MAC address field, you can change the MAC address currently assigned to the virtual machine. MAC addresses are automatically generated during the virtual machine creation. However, you can modify the default MAC address by typing another value in the MAC address field or clicking the Generate button. When entering a new MAC address, make sure that it is unique within your network.

4. Click OK .

For the information about troubleshooting networking problems, refer to the Parallels knowledge base available at the Parallels website.