Listing Adapters

The Network Adapters subtab (displayed on clicking the Network tab on the Hardware Node dashboard) displays a list of network interface cards (NICs) and VLAN adapters currently available on the Hardware Node. The information on the network adapters is presented in the table having the following columns:

Column Name	Description
Interface	The name assigned to the network adapter (e.g. `eth0`).
Type	Indicates whether it is a physical adapter ('Physical') or a VLAN adapter ('VLAN').
VLAN ID	The ID assigned to the VLAN adapter. Relevant for VLAN adapters only.
Virtual Network	The name of the Virtuozzo Virtual Network, if any, associated with the network adapter. Note: To learn more about the notion of Virtuozzo Virtual Networks and their relation to physical adapters, VLAN adapters, and Containers, please refer to the Managing Virtual Networks section.
IP Addresses	The IP addresses assigned to the network adapter.
MAC Address	The MAC address of the network adapter.

To facilitate your working with network adapters, you can:

Configure the number of columns to be displayed in the Network Adapters table. To this effect, click the Select Columns link and clear the check boxes near the column name(s) that you wish to hide.
Modify the number of network adapters simultaneously displayed in the Network Adapters table by clicking the 10, 20, 40, or 80 link at the top of the table.

The Network Adapters subtab also allows you to:

Remove an existing VLAN adapter by selecting the check box near the corresponding adapter and clicking the Delete button.
Create a new VLAN adapter by following the New VLAN Interface link at the top of the Network Adapters table.
Associate a network adapter with any of the existing Virtuozzo Virtual Networks by clicking the name of the corresponding adapter in the Network Adapters table.

Please send us your feedback on this help page