|
|
|
|
The Configure screen allows you to connect the physical network adapter existing on the Hardware Node to any of the available Virtuozzo Virtual Networks. This screen can be accessed by clicking the Network tab on the Hardware Node dashboard, then clicking the name of the network adapter you wish to join to a Virtual Network, and clicking Configure.
Note: To learn more about the notion of Virtuozzo Virtual Networks and their relation to physical adapters, VLAN adapters, and Containers, please refer to the Managing Virtual Networks section.
On this screen you can connect the physical network adapter to a Virtual Network (and, consequently, to the Containers joined to this Virtual Network) by selecting the name of the corresponding Virtual Network on the drop-down menu in the Network field. If you do not wish the adapter to be joined to any Virtual Network, select Not Assigned on the drop-down menu.
After deciding on the Virtual Network, click the Submit button.
Note: To assign IP addresses and other network parameters to the adapter, use a command-line interface and the ifconfig utility.
