Verify join status

After you join a Tenant to the Tenant Broker, you should verify that the procedure was successful.

First, verify the Tenant Broker status in the Tenant console:

1. Log in to the Tenant Farm.
2. In the RAS Console, navigate to Farm > Site and select the Site tab in the right pane.
3. You should see the Tenant Broker section with the Status column, which should say OK . If the status is Not verified , make sure that the Tenant Broker is operational (or contact the Tenant Broker admin if you are not him or her).

You can also see additional Tenant Broker information by right-clicking it and choosing Properties . The information includes the following:

• Name: The Tenant Broker name.
• Primary address: The primary RAS Publishing Agent address.
• Secondary address: The secondary RAS Publishing Agent address (if available).

You should then verify the Tenant status in the Tenant Broker console:

1. Log in to the Tenant Broker.
2. In the RAS Console, navigate to Farm > Tenants .
3. In the Tenants tab, find the Tenant of interest and examine the Status column, which should say OK if the Tenant is joined properly. For other possible Status column values, see Tenant configuration .