View and Modify RD Session Host Properties

To configure an RD Session Host server:

1. In the RAS Console, navigate to Farm / Site / RD Session Hosts .
2. Right-click a server and click Properties in the context menu.
3. The Server Properties dialog opens where you can configure the RD Session Host server:

Properties

Select or clear the Enable Server in site option to enable or disable a server. By default, a server is enabled. A disabled server cannot serve published applications and virtual desktops to clients.

Other elements on this page are:

• Server: Specifies the server name.
• Description: Specifies the server description.
• Change Direct Address: Select this option if you need to change the direct address that Parallels Client uses to establish a direct connection with the RD Session Host.

Agent Settings

Each RD Session Host in the farm has a RAS RD Session Host Agent installed through which it communicates with other Parallels RAS components. Use the Agent Settings tab page to configure the agent.

To use default settings, select the Inherit default settings option. To view or modify the default settings, click the Edit Defaults link.

If you want to specify custom settings for a given server, clear the Inherit default settings option and specify agent properties as follows:

• Port . Specifies a different remote desktop connection port number if a non-default port is configured on the server.
• Max Sessions . Specifies the maximum number of sessions.
• Publishing Session Disconnect Timeout . Specifies the amount of time each session remains connected in the background after the user has closed the published application. This option is used to avoid unnecessary reconnections with the server.
• Publishing Session Reset Timeout . This feature allows you to control how long it takes for a session to be logged off after it is marked as "disconnected".
• Allow Client URL/Mail Redirection . Select this option to allow http and mailto links to be opened using a local application on the client computer rather than the server’s resources. To configure a list of URLs which should not be redirected, navigate to the URL Redirection tab in the Settings node of a site.
• Preferred Publishing Agent . Select a Publishing Agent to which the RD Session Host should connect. This is helpful when site components are installed in multiple physical locations communicating through WAN. You can decrease network traffic by specifying a more appropriate Publishing Agent.
• Allow 2XRemoteExec to send command to the client . Select this option to allow a process running on the server to instruct the client to deploy an application on the client side. More about 2XRemoteExec in the Using RemoteExec subsection below.
• Enable applications monitoring . Enable or disable monitoring of applications on the server. Disabling application monitoring stops the WMI monitoring to reduce CPU usage on the server and network usage while transferring the information to RAS Publishing Agent. If the option is enabled, the collected information will appear in a corresponding RAS report. If the option is disabled, the information from this server will be absent from a report.
• Use RemoteApps if available . Enable this option to allow use of remote apps for shell-related issues when an app is not displayed correctly. This feature is supported on the Parallels Client for Windows only.

Using 2XRemoteExec

2XRemoteExec is a feature that facilitates the servers ability to send commands to the client. This is done using the command line utility 2XRemoteExec.exe . Command line options include:

2XRemoteExec examples:

The following command displays a message box describing the parameters that can be used.

2XRemoteExec -?

This command runs Notepad on the client.

2XRemoteExec C:\Windows\System32\Notepad.exe

In this example, the command opens the C:\readme.txt file in the Notepad on the client. No message is shown and 2XRemoteExec would wait for 6 seconds or until the application is started.

2XRemoteExec C:\Windows\System32\Notepad.exe “C:\readme.txt”

User Profile Disks

User profile disks are virtual hard disks that store user application data on a dedicated file share. This disk is mounted to the user session as soon as the user signs in to the RD Session Host server, and unmounted when the user logs out.

To use the default user profile disks settings, select the Inherit default settings option. To view or modify the default settings, click the Edit Defaults link. The Default Server Properties dialog has the same design as the Server Properties dialog. You can use the instructions below to modify both the default and an individual server properties.

To configure user profile disks for a given RD Session Host server, clear the Inherit default settings option and specify the options described below.

Enable or disable user profile disks: Use the drop-down list box to specify whether to enable or disable user profile disks on the server. Select from the following options:

• Do not change. Keep the current server settings (default).
• Enabled . Enable user profile disks.
• Disabled . Disable user profile disks.

Disk location: In the text field provided, specify a network location where user profile disks should be created. Use the Microsoft Windows UNC format to specify a location (e.g. \\RAS\users\disks ). Please note that the server must have full control permissions on the disk share.

Maximum size: Enter the maximum allowed disk size (in gigabytes).

User profile disks data settings: Click this button to open the User Profile Disks Data Settings dialog. In the dialog, you can specify which user folders should be stored on the user profile disk. Select one of the following:

• Store all user settings and data on the user profile disk . All folders, except those specified in the exclusion list, will be stored on the user profile disk. To add or remove folders to/from the exclusion list, click the [+] or [-] buttons.
• Store only the following folders on the user profile disk . Only folders specified in the inclusion lists will be stored on the user profile disk. There are two inclusion lists. The first one contains standard user profile folders (e.g. Desktop, Documents, Downloads, etc.) and allows you to select the folders that you want to include. The second list (below the first list) allows you to specify additional folders. Click the [+] or [-] buttons to add or remove folders.

Desktop Access

The Desktop Access tab page allows you to restrict remote desktop access to certain users.

By default, all users who have access to remote applications on an RD Session Host can also connect to the server via a standard RDP connection. If you want to restrict remote desktop access to certain users, do the following:

1. On the Desktop Access tab page, select the Restrict direct desktop access to the following users option. If you have the Inherit default settings option selected, click the Edit Defaults link to see (and modify if needed) the default configuration. The rest of the steps apply to both the Server Properties and Default Server Properties dialogs.
2. Click the Add button.
3. Select the desired users. To include multiple users, separate them by a semicolon.
4. Click OK .
5. The selected users will appear in the list on the Desktop Access tab page.

Users in this list will still be able to access remote applications using Parallels Client, but will be denied direct remote desktop access to this server.

Please note that members of the Administrator group will still be able to connect to the remote desktop even if they are included in this list.

RDP Printer

The RDP Printer tab page allows you to configure the renaming format of redirected printers. The format may vary depending on which version and language of the server you are using.

To use default RDP printer settings, select the Inherit default settings option. To view or modify the default options, click the Edit Defaults link.

The RDP Printer Name Format drop-down list allows you to select a printer name format specifically for the configured server.

Select the Remove session number from printer name and the Remove client name from printer name options to exclude the corresponding information from the printer name.