Virtual network adapterAdd a network adapter --device-add net --type <shared | bridged | host-only> [--iface <name>] [--mac <addr | auto>] [--ipadd <addr [/mask]> | --ipdel <addr[/mask]> | --dhcp <yes | no> | --dhcp6 <yes | no>] [--gw <gw>] [--gw6 <gw>] [--nameserver <addr>] [--searchdomain <addr>] [--configure <yes | no>] [--apply-iponly <yes | no>] [--adapter-type <virtio | e1000 | e1000e | rtl>] Modify a network adapter --device-set <adapter_name> --type <shared | bridged | host-only> [--iface <name>] [--mac <addr | auto>] [--ipadd <addr [/mask]> | --ipdel <addr[/mask]> | --dhcp <yes | no> | --dhcp6 <yes | no>] [--gw <gw>] [--gw6 <gw>] [--nameserver <addr>] [--searchdomain <addr>] [--configure <yes | no>] [--apply-iponly <yes | no>] [--adapter-type <virtio | e1000 | e1000e | rtl>] Parameters adapter_name: the name of the virtual network adapter to modify (--device-set command only). To obtain the list of the available adapters, use the prlctl list --info command. --type: the type of the network adapter to create in the virtual machine. --iface: the host network interface to be assigned to the bridged or host-only virtual network adapter. --mac: the MAC address to be assigned to the virtual network adapter. If omitted, the MAC address will be automatically generated. --ipadd: the IP address to be assigned to the network adapter in the virtual machine. --ipdel: the IP address to be removed from the network adapter in the virtual machine. --dhcp: specifies whether the virtual network adapter should get its IP settings through a DHCP server. --dhcp6: specifies whether the virtual network adapter should get its IPv6 settings through a DHCP server. --gw: the default gateway to be used by the virtual machine. --gw6: the default IPv6 gateway to be used by the virtual machine. --nameserver: the default DNS server to be used by the virtual machine. --searchdomain: the default search domain to be used by the virtual machine. --configure: if set to yes, the settings above are applied to the virtual network adapter instead of its original settings. Configuring any of the settings automatically sets this option to yes. --apply-iponly: if set to yes, the hostname, nameserver, and search domain settings from the virtual machine configuration file are ignored. --adapter-type: specifies the network adapter emulation type. |
||||
|