Network Traffic Parameters

The table below summarizes the network traffic parameters that you can control. The File column indicates whether the parameter is defined in the global configuration file (G), in the Container configuration files (V), or it is defined in the global configuration file but can be overridden in a separate Container configuration file (GV).

Parameter	Description	File
`traffic_shaping`	If set to `yes` , traffic limitations for outgoing traffic are set for Containers. The default is `no` .	G
`bandwidth`	This parameter lists all the network adapters installed on the server and their bandwidth.	G
`totalrate`	This parameter defines the bandwidth to be allocated for each and every network class. It is active if traffic shaping is turned on.	G
`rate`	If traffic shaping is turned on, this parameter specifies the bandwidth guarantee for any Container.	GV
`ratebound`	If this parameter is set to `yes` , the bandwidth guarantee (the global rate parameter) is also the limit for the Container, and the Container cannot borrow the bandwidth from the `TOTALRATE` bandwidth pool.	V

Top of page

Feedback