Status Bar

The status bar consists of three parts:

• The virtual machine state menu ;
• The view mode menu ; and
• The virtual machine devices.

The Virtual Machine State Menu

You can start, shut down, pause, suspend, resume, and stop the virtual machine using the Virtual Machine State menu on the status bar. Click the Virtual Machine State button and select the desired command from the menu.

The View Mode Menu

To change the virtual machine view mode, use the View Mode menu on the status bar. This menu is available only when the virtual machine is running. To switch to the Coherence mode, click the Coherence button . To switch to any other view mode, click the down arrow button near the Coherence button and select the desired view mode from the menu. For detailed information on the view modes, see Changing the View Mode .

The Virtual Machine Devices

In the virtual machine status bar, you can find the list of devices connected to the virtual machine. This list is available only when the virtual machine is running. By default, the virtual machine devices list is hidden. To see the list, click the left arrow button near the Configure button .

The icons for the following devices are displayed on the status bar:

• keyboard
• floppy disk drive
• CD/DVD drive
• hard disk
• network adapter
• sound card
• USB controller
• shared folders
• serial port
• printer port

If you see the icon in the status bar, it means that Parallels Tools are outdated and need to be reinstalled.

If a device can be connected or disconnected at runtime (actually, most of the devices can be), this can be done using the device's shortcut menu. Click the device icon to display its shortcut menu and select the command. The picture below shows the shortcut menu for the CD/DVD drive.

You can also connect CD/DVD discs or images of discs to the virtual machine's CD/DVD drive or connect a floppy image to its floppy drive in the following way: drag the required image file over the CD/DVD drive icon on the Parallels Desktop status bar. For more information, please refer to the Changing Configuration at Runtime section .

To add devices to the virtual machine configuration or remove them from the configuration, follow the instructions described in Adding and Removing Devices .